Linux users mostly already know Squid proxy server as the best and most used proxy server. As on my previous post “Bandwidth Shaping Using Squid Cache and WIPFW” I need a free proxy server for my windows server. I found SquidNT which is ported from its Linux version by Guido Serassio.
You can download SquidNT from Acme Consulting’s website or here. If you want to do bandwidth shaping then you must download SquidNT with Delay Pool version. On this installation guide, I use the Delay Pool version as I want to do bandwidth shaping.
Step 1: download SquidNT Delay Pool version here
Step 2: extract the zip file and put it on C: drive
Step 3: configure the squid.conf file on /etc folder. There is squid.conf.default you can rename it to squid.conf and edit it.
Step 4: configure the DNS nameserver. On squid.conf find:
# TAG: dns_nameservers
# Use this if you want to specify
# a list of DNS name servers (IP addresses)
# to use instead of those given in your
# /etc/resolv.conf file.
# Example: dns_nameservers 10.0.0.1 184.108.40.206
To find what is your nameserver is type: ipconfig on command prompt and find the IP number on Default Gateway field. Copy it to your squid.conf file like above.
Step 5: setup ACL
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from
# where browsing should be allowed
#acl our_networks src 192.168.1.0/24 192.168.2.0/24
#http_access allow our_networks
acl our_networks src 192.168.0.0/16
http_access allow our_networks
Here you can setup which network that allowed to use your proxy server. From ipconfig command you can find out what is your IP address, usually it have 192.168.0.x format so you can apply the configuration above.
Step 6: Setup the hostname
# TAG: visible_hostname
# If you want to present a special hostname …
# then define this. Otherwise, the return …
# will be used. If you have multiple caches …
# get errors about IP-forwarding you must …
# names with this setting.
Here you can define the name for your hostname, for example you can use “localhost” or “server.youdomain.com”
Step 7: Setup cache directory
Run this command from command prompt: c:\squid\sbin\squid -D -z
Step 8: On Windows XP/2000/2003 you can setup SquidNT as a service
Run this command from command prompt: c:\squid\sbin\squid -i
You can start/stop/restart the service called Squid from: Control Panel > Administrative Tools > Services
Step 9: Setup your browser to use proxy server
For Internet Explorer users, go to: Tools > Internet Options. Select Connection tab and click on LAN Settings
On the pop up window you’ll find proxy box, give a check on “Use a proxy server for your LAN…” and fill your server’s IP (where you install SquidNT) on the address field and fill “3128” on port field. 3128 is the default port for SquidNT.
Click Ok to save the configuration. Now try to open a web page and see if you can open it. If you can then the configuration is set correctly.
Step 10: Setup the Delay Pool.
As I want to do bandwidth shaping then I needs to setup the Delay Pool. Here is the configuration:
# delay_pools 0
delay_class 1 1
Then create delay_access:
# delay_access 2 allow lotsa_little_clients
# delay_access 2 deny all
delay_access 1 allow our_networks
delay_access 1 deny all
Now we setup how much bandwidth we want to allocate. For example, you have 384 Kbps ADSL connection which means you can download at around 40KB/s. Now you want to shape the maximum to around 30KB/s download rate, here is the configuration:
#delay_parameters 2 32000/32000 8000/8000 600/8000
# There must be one delay_parameters line for each delay pool.
delay_parameters 1 30000/30000
Step 11: Restart the Squid service from: Control Panel > Administrative Tools > Services
Done! Now you have 30KB/s for browsing and another 10KB/s reserved for other internet connection like chatting or streaming radio :)